Designing biomass supply chains within planetary boundaries

The design of sustainable supply chains, which recently emerged as an active area of research in process systems engineering, is vital to ensure sustainable development. Despite past and ongoing efforts, the available methods often overlook impacts beyond climate change or incorporate them via standard life cycle assessment metrics that are hard to interpret from an absolute sustainability viewpoint. We here address the design of biomass supply chains considering critical ecological limits of the Earth—planetary boundaries—which should never be surpassed by anthropogenic activities. Our method relies on a mixed-integer linear program that incorporates a planetary boundaries-based damage model to quantify absolute sustainability precisely. We apply this approach to the sugarcane-to-ethanol industry in Argentina, identifying the optimal combination of technologies and network layout that minimize the impact on these ecological boundaries. Our framework can find applications in a wide range of supply chain problems related to chemicals and fuels production, energy systems, and agriculture planning.     

Iron recovery from zinc mine tailings by magnetic separation followed by carbothermal reduction of self‐reducing briquettes

The volume of tailings produced by the extractive industry has been increasing due to the processing of the low‐grade ore. This issue can cause environmental accidents and require significant investment to control the disposal of tailings. Therefore, this study aims to recover iron from zinc mine tailings by wet magnetic separation followed by the carbothermal reduction of self‐reducing briquettes. Two magnetic separation routes were investigated to concentrate iron. Zinc mine tailings were processed by route I, in a rougher stage followed by a scavenger stage; and route II, in a rougher stage followed by a cleaner stage. The carbothermal reductions were performed using self‐reducing briquettes composed of Fe concentrate from the route with high Fe content and charcoal. The products were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM‐EDS), x‐ray diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP‐OES), and volumetric chemical analysis. Magnetic separation route II provided the highest‐grade Fe concentrate, 52% Fe, while route I provided 33% Fe. In the carbothermal reductions, a metallization degree of 98% in the Fe concentrate briquette, 97% in the briquette with a 10% replacement of its raw material by Fe concentrate, and 99% in the hematite briquette was reached. The replacement of raw material by Fe concentrate showed no significant change in Fe recovery. Considering the whole process, magnetic separation and carbothermal reduction, the recovery of Fe from the zinc mine tailings was 67%. Therefore, the process route suggested in this study will not only reduce tailings disposal and consequently the risk of environmental accidents, but it will also provide profitable raw material for the steel industry.     

Fabrication of hybrid proton-exchange membranes using a brandnew high temperature ionic liquid as charge transporting and clay modifier

The search for more compatibility between ionic liquids (ILs) and polymer matrices in proton-exchange membrane fuel cells (PEMFCs) is one of the ways in which IL leaking from proton-exchange membranes could be minimized. In this work, it is presented the synthesis of an aromatic high temperature ionic liquid (HTIL), which, incorporated into an aromatic matrix such as sulfonated polyether ether ketone (sPEEK), is expected to diminish the IL leaking that normally affects PEMFC. Phenylethylammonium trifluoromethane sulfonate (PhetaTfO) was successfully synthesized and characterized. Its melting point of 88°C makes it to classify as a HTIL and it was employed as modifier of natural Montmorillonite, forming the phenylethylammonium intercalated montmorillonite (MmtPheta) and thus, ternary membranes containing PhetaTfO, MmtPheta, and sPEEK were prepared and characterized. Immersion tests demonstrated a higher compatibility of PhetaTfO with matrix when compared to the reference DemaTfO, which was reflected in up to 30% lower IL loss by the synthesized IL than the DemaTfO; X-rays diffraction (XRD) patterns demonstrated that the modified clay was properly dispersed inside the membranes, while dynamic mechanical analyses (DMA) results indicated a strong plasticizer effect along the increase of PhetaTfO content inside the membrane, while at the same time, the conductivity increased in an exponential manner, which permitted to identify an empiric exponential equation to evaluate the effect of concentration on ionic conductivity. The maximum conductivity obtained at IL concentrations of around 38 wt% was 0.2 mS/cm. It could expect high ionic conductivities of 10 mS/cm when the concentration of this IL is 60%; nevertheless, in order to achieve that, crosslinking treatments should be done to give the membranes enough mechanical resistance.     

Extracting Microfacet‐based BRDF Parameters from Arbitrary Materials with Power Iterations

We introduce a novel fitting procedure that takes as input an arbitrary material, possibly anisotropic, and automatically converts it to a microfacet BRDF. Our algorithm is based on the property that the distribution of microfacets may be retrieved by solving an eigenvector problem that is built solely from backscattering samples. We show that the eigenvector associated to the largest eigenvalue is always the only solution to this problem, and compute it using the power iteration method. This approach is straightforward to implement, much faster to compute, and considerably more robust than solutions based on nonlinear optimizations. In addition, we provide simple conversion procedures of our fits into both Beckmann and GGX roughness parameters, and discuss the advantages of microfacet slope space to make our fits editable. We apply our method to measured materials from two large databases that include anisotropic materials, and demonstrate the benefits of spatially varying roughness on texture mapped geometric models.     

Mutual spectral residual approach for multifocus image fusion

Multifocus image fusion is the process of obtaining a single image from multiple partially focused images such that the newly formed image consists of the well-defined information extracted from each source image. This paper proposes the use of saliency of the source images based on Mutual Spectral Residual. Spectral Residual brings out the unique/salient features of an image in frequency domain. The idea of proposed mutual spectral residual is to emphasize the relative unique features of a source image with respect to the other source images. The relative unique features are utilized to form saliency maps for each source image. These saliency maps can clearly indicate the focused and defocused parts of an image. Based on the saliency maps obtained, the image fusion takes place in spatial domain. Visual inspection and quantitative evaluation of the fused images obtained by the proposed method, using different evaluation metrics, demonstrate its effectiveness over several existing image fusion methods.     

Wii remote–based low-cost motion capture for automated assembly simulation

This paper describes the development of a Wii remote (Wiimote)–based low-cost motion capture system and demonstrates its application for automated assembly simulation. Multiple Wiimotes are used to form a vision system to perform motion capture in 3D space. A hybrid algorithm for calibrating a multi-camera stereo vision system has been developed based on Zhang’s and Svoboda’s calibration algorithms. This hybrid algorithm has been evaluated and shown accuracy improvement over Svoboda’s algorithm for motion capture with multiple cameras. The captured motion data are used to automatically generate an assembly simulation of objects represented by CAD models in real time. The Wiimote-based motion capture system is practically attractive because it is inexpensive, wireless, and easily portable. Application examples have been developed for a single vision system with two Wiimotes to track the assembly of a microsatellite prototype frame and for an integrated vision system with four Wiimotes to track the assembly of a bookshelf.     

Bed morphology, flow structure, and sediment transport at the outlet of Lake Huron and in the upper St. Clair River

An integrated multibeam echo sounder and acoustic Doppler current profiler field survey was conducted in July 2008 to investigate the morphodynamics of the St. Clair River at the outlet of Lake Huron. The principal morphological features of the upper St. Clair River included flow-transverse bedforms that appear weakly mobile, erosive bedforms in cohesive muds, thin non-cohesive veneers of weakly mobile sediment that cover an underlying cohesive (till or glacio-lacustrine) surface, and vegetation that covers the bed. The flow was characterized by acceleration as the banks constrict from Lake Huron into the St. Clair River, an approximately 1500-m long region of flow separation downstream from the Blue Water Bridge, and secondary flow connected to: i) channel curvature; ii) forcing of the flow by local bed topography, and iii) flow wakes in the lee side of ship wrecks. Nearshore, sand-sized, sediment from Lake Huron was capable of being transported into, and principally along, the banks of the upper St. Clair River by the measured flow. A comparison of bathymetric surveys conducted in 2007 and 2008 identifies that the gravel bed does undergo slow downstream movement, but that this movement does not appear to be generated by the mean flow, and could possibly be caused by ship-propeller-induced turbulence. The study results suggest that the measured mean flow and dredging within the channel have not produced major scour of the upper St. Clair River and that the recent fall in the level of Lake Huron is unlikely to have been caused by these mechanisms.